Introduce 7 common zebra barcode printer

Zebra barcode printers are favored by users with superior performance and durable quality. We will introduce you to the back to default and paper testing operations of each of the 7 commonly Zebra barcode printers.
1,Zebra105SL Zebra barcode printer paper testing: Shut down, press and hold the three button feed button, pause button and cancel button; boot, wait for the display to have content, release, barcode printer will automatically measure paper.

Restore factory settings: press "SETUP" twice, then press "+" "-" to turn the page, find "LOADDEFAULT", then press "SAVE", the barcode will automatically feed the paper, and restore the factory settings, restart the machine .

2, ZebraS600 Zebra barcode printer restore factory settings: Shut down, while holding down PAUSE and FEED boot, about 3 seconds, press the MODE4 button four times, save the settings, then return to the print mode, then shut down.

Detection method: In the case of power on, press and hold the MODE button, the CALIBRATE indicator light is on, then press the FEED button.

3, ZebraZ400 zebra barcode printer restore factory settings: Shut down, press and hold FEED + PAUSE button to turn on, about 10 seconds later release, the printer will automatically restore the factory settings paper test method: press CALIBRATE button to boot, release CALIBRATE after paper feed The key, then a lot of paper, after the paper is finished, shut down, then turn on the machine, the paper is completed.

4, ZebraS4M zebra barcode printer test bar code print head is working properly, whether there is a broken needle phenomenon or check the pressure balance on both sides of the print head: just print the test page you can know, the method is to close the barcode printer, then press and hold the PAUSE button Turn on the machine and wait for about 8 seconds to release. The barcode printer will automatically print out the paper and check if the printed content is intact. Restore factory settings: Shut down, press and hold the paper exit button, the pause button is turned on, and after about 8 seconds, the printer will be restored to factory settings.

5, Zebra110XiIII zebra barcode printer paper recognition method: first press the pause button, then press CALIBRATE.

6, Zebra105SE Zebra barcode printer paper: In the power-on state, press MODE three times, then press the FEED button, the printer automatically performs the paper measurement action.

7, ZebraZ4M zebra barcode printer paper: press and hold the pause button to start. Whether the zebra barcode print head is broken: press and hold the pause button to turn on the machine for 8 seconds, release the bar code printer to print a black block barcode label paper, check whether there is a white line on the sticker, if it is generally judged to be broken If the needle is pressed, it is very likely that the printed barcode will not be scanned.